nagios监控windows
监控windows主机
成都创新互联公司2013年至今，先为济南等服务建站，济南等地企业，进行企业商务咨询服务。为济南企业网站制作PC+手机+微官网三网同步一站式服务解决您的所有建站问题。
监控windows主机通过snmp或者nsclient++来监控
Nsclient++可以监控windows主机的cpu、内存、磁盘空间、进程、服务
Nsclient++也支持nrpe所以也可以通过nrpe来监控
NSCA主动与nagios发送检测，nagios端也需要NSCA daemon
通常使用check_nt，也是最简单，功能最少的。
安装NSClient
Allowed hosts：
Nagios所在的主机地址，我这里是192.168.102.128
Password：密码
是否允许常见插件
是否允许check_nt
是否允许check_nrpe
关闭防火墙之后
上图为安装之后查看端口，12489监控0.0.0.0，即check_nt与nsclient++通信的端口
5666为nrpe所使用的端口
想要nagios监控windows
要安装check_nt
[root@localhostnagios-cn-3.2.0]# cd /usr/local/nagios/libexec/
[root@localhostlibexec]#ls
[root@localhost libexec]# ./check_nt–h 查看帮助。
[root@localhost libexec]# ./check_nt -H192.168.102.132（被监控主机ip） -p 12489 -v UPTIME
System Uptime - 0 day(s) 1 hour(s) 35 minute(s) 查看当前windows主机的启动时间
[root@localhostlibexec]# ./check_nt -H 192.168.102.132 -p 12489 -v CPULOAD -w 80 -c 90 -l5,80,90
CPU Load2% (5 min average) | '5 min avgLoad'=2%;80;90;0;100
查看当前windows主机的cpu使用情况。
[root@localhostlibexec]# ./check_nt -H 192.168.102.132 -p 12489 -v USEDDISKSPACE -w 80 -c 90-l C
C:\ -total: 14.65 Gb - used: 9.72 Gb (66%) - free 4.93 Gb (34%) | 'C:\ UsedSpace'=9.72Gb;11.72;13.18;0.00;14.65
检测C盘的利用率
计划进行监控
[root@localhostobjects]# cd /etc/nagios/objects/
[root@localhostobjects]# ls
commands.cfg localhost.cfg switch.cfg timeperiods.cfg
contacts.cfg printer.cfg templates.cfg windows.cfg
[root@localhost objects]# vim commands.cfg 在个加入新的命令。
definecommand{
command_name check_nt
command_line $USER1$/check_nt -H$HOSTADDRESS$ -p 12489 -v $ARG1$ $ARG2$
}【源文件已经有了】
[root@localhost objects]# vim windows.cfg 定义主机
修改：
可以用vim命令：
.,$s@winserver@winhost@g
. , $s @winserver @winhost @g
当前行最后一行搜索 winserver 用其替换前面 go
【修改主机名，可以不进行修改】
[root@localhost objects]# vim windows.cfg
# Createa service for monitoring the W3SVC service
# Changethe host_name to match the name of the host you defined above
defineservice{
use generic-service
host_name winhost
service_description W3SVC
check_command check_nt!SERVICESTATE!-d SHOWALL -lW3SVC
}
# Createa service for monitoring the Explorer.exe process
# Changethe host_name to match the name of the host you defined above
defineservice{
use generic-service
host_name winhost
service_description Explorer
check_command check_nt!PROCSTATE!-d SHOWALL -lExplorer.exe
}
"windows.cfg" 145L, 4005C 134,0-1 底端
最后启用此配置文件：
[root@localhostobjects]# cd ..
[root@localhostnagios]# vim nagios.cfg
# You canspecify individual object config files as shown below:
cfg_file=/etc/nagios/objects/commands.cfg
cfg_file=/etc/nagios/objects/contacts.cfg
cfg_file=/etc/nagios/objects/timeperiods.cfg
cfg_file=/etc/nagios/objects/templates.cfg
cfg_file=/etc/nagios/objects/windows.cfg 添加
重启之前，检查语法错误。
[root@localhost nagios]# /usr/local/nagios/bin/nagios -v/etc/nagios/nagios.cfg
Nagios Core 3.2.0
Copyright (c) 2009 Nagios Core Development Team and CommunityContributors
Copyright (c) 1999-2009 Ethan Galstad
Last Modified: 08-12-2009
License: GPL
Website: http://www.nagios.org
Reading configuration data...
Read main config fileokay...
Processing object config file '/etc/nagios/objects/commands.cfg'...
Warning: Duplicate definition found for command 'check_nt' (configfile '/etc/nagios/objects/ ommands.cfg', starting on line 241)
Error: Could not add object property in file'/etc/nagios/objects/commands.cfg' on line 242.【有问题了】
Error processing objectconfig files!
***> One or more problems was encountered while processing theconfig files...
Check your configurationfile(s) to ensure that they contain valid
directives and datadefintions. If you are upgrading from aprevious
version of Nagios, youshould be aware that some variables/definitions
may have been removed ormodified in this version. Make sure toread
the HTML documentationregarding the config files, as well as the
'Whats New' section tofind out what has changed.
检查原因是那里重复了。
再进行检测
[root@localhost nagios]# /usr/local/nagios/bin/nagios -v/etc/nagios/nagios.cfg
Nagios Core 3.2.0
Copyright (c) 2009 Nagios Core Development Team and CommunityContributors
Copyright (c) 1999-2009 Ethan Galstad
Last Modified: 08-12-2009
License: GPL
Website: http://www.nagios.org
Reading configuration data...
Read main config fileokay...
Processing object config file '/etc/nagios/objects/commands.cfg'...
Processing object config file '/etc/nagios/objects/contacts.cfg'...
Processing object config file'/etc/nagios/objects/timeperiods.cfg'...
Processing object config file '/etc/nagios/objects/templates.cfg'...
Processing object config file '/etc/nagios/objects/windows.cfg'...
Processing object config file '/etc/nagios/objects/localhost.cfg'...
Read object config filesokay...
Running pre-flight check on configuration data...
Checking services...
Checked 26 services.
Checking hosts...
Checked 12 hosts.
Checking host groups...
Checked 3 host groups.
Checking service groups...
Checked 2 servicegroups.
Checking contacts...
Checked 1 contacts.
Checking contact groups...
Checked 1 contactgroups.
Checking service escalations...
Checked 0 serviceescalations.
Checking service dependencies...
Checked 0 servicedependencies.
Checking host escalations...
Checked 0 hostescalations.
Checking host dependencies...
Checked 0 hostdependencies.
Checking commands...
Checked 24 commands.
Checking time periods...
Checked 5 timeperiods.
Checking for circular paths between hosts...
Checking for circular host and service dependencies...
Checking global event handlers...
Checking obsessive compulsive processor commands...
Checking misc settings...
Total Warnings: 0
Total Errors: 0
Things look okay - No serious problems were detected during thepre-flight check
没有错误。
[root@localhost nagios]# service nagios restart
Running configuration check...done.
Stopping nagios: done.
Starting nagios: done.
重启服务，加载新的配置文件。
最后：
对多台windows主机进行监控：
#cp windows.cfg winserver.cfg
然后修改ip
再把definegroup的注释掉
添加到监控计划中。
重启服务。
本文标题：nagios监控windows
标题网址：http://scjbc.cn/article/gjoedi.html
